All Product Categories

 

 

William Hackett CP-C4 Chain Hoist

The William Hackett CP-C4 chain hoist is manufactured in accordance with EN13157 which requires that it can be used within an operating temperature range of -40°C to +55°C.

William Hackett has taken its extensive knowledge of corrosion protection acquired in the supply of specialist topside and subsea hoisting range to the offshore sector and translated this technology to a second generation range of William Hackett CP-C4 anti corrosion chain hoists. These hoists can be supplied in the following configurations:

  • Single hook suspension unit
  • Low headroom combined chain hoist and push travel trolley
  • Low headroom combined chain hoist and geared travel trolley

 

All the above hoist configurations can also be supplied with the following options:

  • Calibrated Grade T (8) load chain to BS EN818-7 zinc plated with zinc plated hand chain
  • Calibrated Grade T (8) load chain to BS EN818-7 DT9 corrosion coated and hand chain Dacromet corrosion coated
  • Calibrated Grade S (6) 316L stainless steel load chain, hand chain and bottom hook (stainless steel bottom hooks are only available for 500kg and 1 tonne units)
  • Overload protection option available

 

Features

  • 500hrs + Protection against salt spray tests according to ASTM B117
  • Twin pawls as standard
  • Heavy duty forged safety catches
  • Stainless steel fixings used throughout the hoist
  • Hook housing is bolt connected using cap head screws and nyloc nuts
  • All hoist components are corrosion protected
  • Load chain meets the requirements of European standards: EN818-7
  • Compact and robust design for easy handling

 

Performance and Testing

The William Hackett CP-C4 chain hoist has been fully tried and tested to include:

  • Minimum Breaking Load - a minimum of 4 x the WLL
  • The load chain anchor / end stop tested to at least 2.5 x the WLL with no restriction of either the brake or gears
  • All Hoists are 100% proof tested at 1.5 x the Working Load Limit
  • Light load of 2% of Working Load Limit

Product Specifications and Selection